Workout timing · HIIT

HIIT Interval Timer Guide

Use Timer Plus custom intervals to follow the work and recovery periods in your existing HIIT plan. The 30/30 example below uses six work periods and five rests, finishing at 5:30 before preparation or extra breaks.

Set up the 30/30 HIIT example

Example values, not a training prescription or a verified app preset. Timer Plus has no rest after the last interval; the complete-pair calculations below explain a different ending.

Setting or phaseExample value
Work30 seconds per work period
Rest30 seconds between work periods
Work periods6
FinishAfter work period 6: 5:30 total
Preparation and extra breaksAdd separately if your plan includes them

Six minutes, two ways to divide them

30/30 means 30 seconds of work followed by 30 seconds of recovery. Six complete pairs contain three minutes of work and three minutes of recovery: 6 × (30 + 30) = 360 seconds, or 6:00.

40/20 means 40 seconds of work followed by 20 seconds of recovery. Six complete pairs contain four minutes of work and two minutes of recovery: 6 × (40 + 20) = 360 seconds, or 6:00.

Both six-minute examples include recovery after the final work period. For 30/30, stopping after work period six removes the last 30-second recovery and gives 330 seconds, or 5:30.

Count preparation, extra recovery, warm-up and cool-down separately. Equal elapsed time describes the clock, not equivalent effort or training outcomes.

Read the work–recovery cycle

Work, rest, repeatAn interval cycle moves from a work period to a rest period and then repeats. It is a concept diagram, not an app screen. WORK REST REPEAT ONE CYCLE

Work → rest → repeat.

An interval is one part of a repeating timing pattern. This diagram explains the structure; it does not show Timer Plus controls or confirm app behavior.

One work period followed by recovery forms a complete pair. Repeat the pair the number of times in your chosen plan, with its ending made explicit.

What makes a schedule HIIT?

HIIT means high-intensity interval training. The time ratio describes work and recovery; the exercise and effort determine more than the clock can show.

Helgerud and colleagues studied both 15/15-second intervals and four-minute intervals. The study used defined training conditions, not a single universal ratio. A 30/30 schedule alone does not establish that a session is HIIT.

Sources: Helgerud et al. (2007) · PMID 17414804 · Abstract

Keep the exercise context with the schedule

From the research

“All training sessions were performed running on a treadmill”

Jan Helgerud and colleaguesTreadmill-study methods · 2007Read the original source

Helgerud and colleagues used treadmill running with separately specified exercise and effort instructions. The timing examples on this page are separate arithmetic illustrations. The study did not evaluate Timer Plus.

Read a timer schedule as four separate parts

Hov’s treadmill study varied intensity, recovery and work volume together. The 30/30 and 40/20 examples above were not its tested protocols.

PartWhat the six-minute examples tell you
ScheduleThe work and recovery lengths, six repeated pairs and an ending after recovery are specified.
IntensityAn effort target is still needed from the workout plan. Thirty or forty seconds of work does not specify how hard that work is.
ExerciseThe seconds do not identify the movement or whether recovery means resting or moving. Running, cycling and body-weight exercises do not become the same protocol by sharing a timer pattern.
ScopeThese examples calculate elapsed time. They do not measure a training result or establish that an app follows the same sequence.

Sources: Hov et al. (2023 issue) · PMC10099854 · §2.4

Match the complete sequence

Check the ending and any changing phases

Illustrative clock schedules. A and B are phase labels, not exercise instructions. Preparation is additional; these examples do not establish an app preset.

Scroll sideways to see all columns

Written sequenceInclude the final recoveryOmit only the final recovery
Six 40-second work periods with 20-second recovery6 × (40 + 20) = 360 seconds, or 6:00.6 × 40 + 5 × 20 = 340 seconds, or 5:40.
A 30 seconds → recovery 20 → B 40 → recovery 20; repeat this whole group twice2 × (30 + 20 + 40 + 20) = 220 seconds, or 3:40.220 − 20 = 200 seconds, or 3:20. Earlier recoveries stay in place.

Turn the written sequence into a timing check

  1. Write the whole sequence

    Record work, recovery, the number of work periods and the intended ending. Put changing exercises or breaks between groups in their actual order.

  2. Match each phase to the controls

    Compare your written sequence with the durations and repetition controls your installed timer provides. Check how it counts a round, cycle or repeat.

  3. Follow a timing-only run

    Count the phase changes and work periods, then compare the finish with the chosen total. No workout is needed for this check.

  4. Check the conditions you will use

    Repeat with your intended music, screen state and audio output. If you save a setup, reopen it and compare its values before reuse.

Account for the Timer Plus ending

Explore Timer Plus

Open the listing for your device to review the current app details.