Workout timing · Circuit training
Circuit Training Timer: Named Stations and Rounds
Build a circuit in Timer Plus from named stations, transition intervals and a separate rest between rounds. Use the three-station example below as timing values to reproduce: three rounds finish at 7:30, with no rest after the final station.
Set up the three-station circuit example
Use your own exercise names for A, B and C. The product team confirms custom durations, names, sets/cycles and adjustable round rest; this table does not specify current button names or a tested editor workflow.
| Setting or phase | Example value |
|---|---|
| Station order | A 30 s → transition 10 s → B 40 s → transition 10 s → C 20 s |
| One round | 1:50; no transition after Station C |
| Rounds | 3 |
| Between-round rest | 1 minute after rounds 1 and 2 |
| Finish | After Station C in round 3: 7:30 total, before any preparation |
Enter the durations and counts with the Timer Plus setup steps
See why this example has this ending in the detailed sequence and calculation
Separate the station list from its repetition
A timed circuit has two questions: what happens inside one round, and what happens when that round repeats. List each station in order. If moving to the next station needs its own period, include it as a transition instead of silently subtracting it from work time.
Use names from the workout plan you already follow. The A, B and C labels below are placeholders for that plan; their times illustrate the clock and do not prescribe exercises, effort or a suitable training load.
A three-station round, written out
Timing-only example: 30 + 10 + 40 + 10 + 20 = 110 seconds, or 1:50 per round. No separate transition is included after Station C.
Scroll sideways to see all columns
| Phase | Duration | What follows |
|---|---|---|
| Station A | 30 seconds | Transition to B |
| Transition A → B | 10 seconds | Station B |
| Station B | 40 seconds | Transition to C |
| Transition B → C | 10 seconds | Station C |
| Station C | 20 seconds | Between-round rest, or the end after the last round |
Three rounds with two between-round breaks
Three rounds of 1:50 plus two breaks of 1:00: 3 × 110 + 2 × 60 = 450 seconds = 7:30. Preparation and a final recovery are excluded.
Scroll sideways to see all columns
| Part | Start | Finish |
|---|---|---|
| Round 1 | 0:00 | 1:50 |
| Between-round rest | 1:50 | 2:50 |
| Round 2 | 2:50 | 4:40 |
| Between-round rest | 4:40 | 5:40 |
| Round 3 | 5:40 | 7:30 |
Map the written circuit to Timer Plus
Choose a preset or create your sequence
Use the station order from your own plan. Timer Plus supports different interval durations and custom names according to its product team.
Name the work and transition phases
Give each station an exercise name and each transition a recognizable label. Include only transitions your plan needs; the example has none after the third station.
Keep round rest separate
The developer confirms adjustable rest between rounds. Check how the editor’s rest, set and cycle controls reproduce your written sequence rather than assuming every repeat label means the same thing.
Choose the sounds
Configure the sounds or voice prompts you need for station changes. Use Ducking if music should be lowered during cues.
Run a timing-only check
Compare every phase and the final time with your written plan before exercising. Save the setup once its order and ending match.
For the general controls and timer-code workflow, use the setup and sharing guide
The last round has its own ending
Make the next phase recognizable
The Timer Plus team describes custom sounds and voice cues, background operation and signals with the screen locked. Music from another app can continue, with Ducking lowering it during cues. Check your intended output and the finish signal as well as an intermediate transition.
Once the sequence is right, save it for reuse or share it by code. A recipient should check the imported names, durations and ending. Sharing does not transfer a purchase. Timer Plus has no automatic synchronization or built-in timer backups.
Set up your audio with the music and cue settings
Read the current product details and their source
Circuit timing questions
Does each station need the same duration?
No. A written circuit may use different durations. The Timer Plus team confirms support for changing interval lengths and names; configure the order from your own plan.
Is a transition the same as rest between rounds?
They occupy different places. A transition sits between stations inside a round. A between-round break follows a completed station list before it repeats.
Does this example prescribe a circuit workout?
No. It explains a timing sequence. Use the exercises, effort and durations from the plan you intend to follow.
Explore Timer Plus
Open the listing for your device to review the current app details.