Workout timing · Boxing
Boxing Round Timer Guide
Use the round and rest lengths from your existing boxing session or event format. The Timer Plus example below uses three 3-minute rounds and two 1-minute rests, finishing after round three at 11:00.
Set up three rounds with two rests
Timing example only. Three-minute rounds are not a universal boxing rule; use the format that applies to your session. Preparation is outside the total.
| Setting or phase | Example value |
|---|---|
| Round duration | 3 minutes |
| Rest | 1 minute between rounds |
| Rounds | 3 |
| Finish | After round 3: 11:00 total |
| Final rest | None after the last round |
Enter the durations and counts with the Timer Plus setup steps
Before using these round lengths, check which round format applies
Three rounds, two gaps, eleven minutes
The example runs in this order: round one from 0:00 to 3:00; rest to 4:00; round two to 7:00; rest to 8:00; round three to 11:00.
Three rounds supply nine minutes of work. Two between-round rests add two minutes: (3 × 3) + (2 × 1) = 11 minutes. Add a final minute of rest only if the written schedule includes it; that gives 12 minutes.
For equal-length rounds, count one fewer between-round rests than rounds. Preparation is additional time. A changing round length or an interval inside a round needs its own place in the sequence.
Compare this structure with other workout timing patterns
Separate round length from inside-round cues
Illustrative clock examples. Your session or event supplies the format. A and B below are phase labels, not drills or intensity targets.
Scroll sideways to see all columns
| Example | Clock calculation | Keep this separate |
|---|---|---|
| Three 2:00 rounds with two 1:00 rests | 3 × 120 + 2 × 60 = 480 seconds, or 8:00. An additional final 1:00 rest makes 9:00. | The final rest changes the total; it is not one of the two between-round gaps. |
| Nine pairs of 10-second A and 10-second B phases inside one round | 9 × (10 + 10) = 180 seconds, or 3:00. | A separate 1:00 between-round rest comes after that round. It does not replace an A or B phase. |
See the rounds and the optional final rest
Three 3-minute rounds + two 1-minute rests = 11 minutes.
- Without the final rest: 3 × 3 min + 2 × 1 min = 11 min.
- With the optional final rest: 11 min + 1 min = 12 min.
The dashed final rest is optional in this illustration. This is not a universal competition format or a training prescription, and it does not establish Timer Plus behavior.
Illustrative schedule only: three 3-minute rounds with two 1-minute rests = 11 minutes. A final 1-minute rest would make 12 minutes. This is not a universal competition format.
Which round length applies?
Round length depends on the format. The USA Boxing National Rule Book effective January 1, 2026 specifies three-minute rounds for Elite and Youth national competitions and two-minute rounds for Junior national competitions.
Those rules apply to named competition categories. They do not set every gym session, professional bout or other combat sport. Use the applicable event rules or the format supplied for your session.
Bring the required format to the timer
For phases inside a round, check the whole changing sequence
Follow each round boundary
Write the format
Record the round count, each round length, each rest and the cues the session requires. Keep the source of that format with the sequence.
Match the available controls
Compare the complete sequence with the controls in your installed version, including any change within a round or between rounds.
Check the ending
Run a timing-only check. Count the rounds, distinguish their start and end cues, and observe whether rest follows the final round.
Listen with your intended setup
Repeat with the speaker or headphones, music and screen state you intend to use.
Compare the written sequence with your actual controls using the setup checklist
Check the requirements for your own platform in the platform requirements checklist
Before deciding on an offer, review the purchase and access questions
If the timing or cues do not match your notes, prepare a report with the expected and actual sequence
End after the final round
Explore Timer Plus
Open the listing for your device to review the current app details.
For the Apple listing and device checks, read the iPhone and iPad listing guide
For the Google Play listing and device checks, read the Android listing guide